Cartridges

We manufaction a series of cartridges for single use injection systems. These include cartridges for Bio-Mecaject, and Bio-Hydro Cartridge™ and Hydro-Mini Cartridge™ for Bio-Hydroject single use injection systems.

The "Biotech" single use cartridge are made of biocompatible Polypropylene homopolymer; they are moulded with a specify low temperature injection moulding technique. This technique makes it possible to increase amorphous of the Polypropylene surface.

BioHydro Cartridge™

BioHydro Cartridge™

BioHydro Cartridge™

The Bio Hydro Cartridge is intended to be use with BIO HYDROJECT™ single use IOL Injector having a hydraulic effect of the viscoelastic solution to push the IOL with a silicon stopper.

Thinner and Smaller than the traditional cartridge, it ensures safety of the patient eye and integrity of Intraocular Lens during injection; it allows the surgeon to control his IOL injection technique in the eye, through a micro incision from 1.75 mm to 2.6 mm depending upon the insertion technique used.


ReferenceTheoretical Diameters
BHC-150a) Oval Shape
b) Inner Ø :1.5 mm x 1.7 mm
c) Outer Ø :1.75 mm x 2.0 mm
See also: Injectors with Hydraulic effect

HydroMini Cartridge™

HydroMini Cartridge™

HydroMini Cartridge™

Made to fulfil Bi-Manual Phaco Surgery needs with micro Lenses, the Biotech HydroMini™ cartridge is indented to be used with Biotech Hydroject™ single use IOL Injector having a hydraulic effect of the viscoelastic solution to push the IOL with a silicon stopper. It allows the surgeon to control his IOL injection technique in the eye, through a sub-micro incision from of 1.7 mm.


ReferenceTheoretical Diameters
BHMC-145a) Oval Shape
b) Inner Ø :1.45 mm
c) Outer Ø :1.70 mm
See also: Injectors with Hydraulic effect

BioMecaject Cartridge™

BioMecaject Cartridge™

BioMecaject Cartridge™

The BioMecaject Cartridge is indented to be used with BIO MECA JECT™ single use IOL Injector having a mechanical action to the lens. It allows the surgeon to inject the IOL with delicacy by an incision 2.8 mm to 3.2 mm depending upon the insertion technique used.


ReferenceTheoretical Diameters
BMC-180a) Oval Shape
b) Inner Ø :1.8 mm x 2.0 mm
c) Outer Ø :2.16 mm x 2.4 mm
See also: Injectors with Hydraulic effect

Packaging of Cartridges

Packaging of Cartridges

Packaging of Cartridges

All types of BIOTECH single use cartridges are supplies in double blisters made of PETG and sealed with Tyvek lids. This packaging ensures perfect sterile conditions and are small enough to deliver cartridges with each IOL.